Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
7-9
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Chapter 7 Using the Command Line Interface to Configure SME
Viewing Cisco SME Cluster, Internal, and Transport Information
Viewing Cisco SME Cluster Details
Additional cluster information can be displayed with the show sme cluster command. Use this command
to show the following:
• Cisco SME cluster details
• Cisco SME cluster interface information
• Hosts and targets in the cluster
• Cisco SME cluster key database
• Cluster node
• Cisco SME cluster Recovery Officer information
• Summary of the Cisco SME cluster information
• Tapes in a cluster
• Tape volume group information
• Cisco SME role configuration
Sample outputs of the show sme cluster command follow:
switch# show sme cluster clustername1 ?
detail Show sme cluster detail
interface Show sme cluster interface
it-nexus Show it-nexuses in the cluster
key Show sme cluster key database
node Show sme cluster node
recovery Show sme cluster recovery officer information
summary Show sme cluster summary
tape Show tapes in the cluster
tape-bkgrp Show crypto tape backup group information
| Output modifiers.
> Output Redirection.
<cr> Carriage return.
switch# show sme cluster clustername1 interface
Interface sme4/1 belongs to local switch
Status is up
switch# show sme cluster clustername1 interface it-nexus
-------------------------------------------------------------------------------
Host WWN VSAN Status Switch Interface
Target WWN
-------------------------------------------------------------------------------
10:00:00:00:c9:4e:19:ed,
2f:ff:00:06:2b:10:c2:e2 4093 online switch sme4/1
Viewing Cluster Key Information
Use the show sme cluster key command to view information about the cluster key database.
A sample output of the show sme cluster key command follows:
switch# show sme cluster clustername1 key database
Key Type is tape volumegroup shared key
GUID is 3b6295e111de8a93-e3f9-e4ae372b1626
Cluster is clustername1, Tape backup group is HR1