Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-30
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
show debug
show debug
To display all Cisco SME-related debug commands configured on the switch, use the show debug
command.
show debug {cluster {bypass | sap sap bypass} | sme bypass}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows all debug commands configured on the switch:
switch# show debug
ILC helper:
ILC_HELPER errors debugging is on
ILC_HELPER info debugging is on
Related Commands
cluster Displays all the debugging flags.
bypass Displays the bypass flags.
sap sap Displays all debugging flags of SAP. Specifies the SAP in the range from 1
to 65535
sme Displays all the debugging flags of Cisco SME.
Release Modification
3.2(2c) This command was introduced.
Commands Description
debug sme Debugs Cisco SME features.