HP StorageWorks C-Series Fabric Switches for SAN-OS 3.2(3) and FabricWare 2.1(3) Release Notes ( AA-RWEHK-TE, January 2008)

15 MDS Multilayer Director & Multilayer Fabric Switches Release Notes
3. Select “Storage” and click on the “Enclosures” tab in the Information Pane
4. Under “Device Type” for the desired device, select “HBA”
5. Save changes by selecting the “Apply Changes” icon on the top left corner of the
Information Pane
Problem Description: VMware ESX on HP c-Class BladeSystem Server Blade using
QMH2462 HBAs and FC Pass-Thru Module may fail to log into the C-Series MDS 9216, MDS
9216A, or 16-port switching module.
Workaround: Set the switch port mode to F.
Problem Description: VMware ESX on HP c-Class BladeSystem Server Blade using
QMH2462 HBAs and FC Pass-Thru Module logs into the MDS 9020 as an FL port if the switch
port mode is set to auto.
Workaround: Set the switch port mode to F.
Note: Refer to the Cisco MDS release notes for a full list of open and closed caveats.