Cisco MDS 9000 Family MIB Quick Reference (OL-18087-01, February 2009)

Send documentation comments to [e-mail]
Americas Headquarters:
© <2009> Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
CISCO-IKE-FLOW-EXT-MIB
This MIB extends the CISCO-IKE-FLOW-MIB, providing additional monitoring objects for IPsec
control flows based on the IKE protocol. This MIB monitors the unique identity and type of each peer
in an IKE traffic flow. For the purposes of this MIB, a traffic flow is a sustained connection between peers
used to create security associations (SAs) for either IKE tunnels (ISKAMP SAs) or IPsec tunnels (IPsec
SAs).
CISCO-IKE-FLOW-EXT-CAPABILITY
The CISCO-IKE-FLOW-EXT-CAPABILITY provides the implementation details for the
CISCO-IKE-FLOW-EXT-MIB, as implemented in the Cisco MDS NX-OS or SAN-OS.
CISCO-IKE-FLOW-MIB
This MIB monitors IKE traffic flows. This MIB was extracted from portions of the the Internet Draft
(draft-ietf-ipsec-flow-monitoring-mib-02.txt). This MIB augments the
CISCO-IPSEC-SIGNALING-MIB for IKE-specific entities.
CISCO-IKE-FLOW-CAPABILITY
The CISCO-IKE-FLOW-CAPABILITY provides the implementation details for the
CISCO-IKE-FLOW-MIB, as implemented in the Cisco MDS NX-OS or SAN-OS.
CISCO-IMAGE-CHECK-MIB
This MIB performs a high availability (HA) compatibility check of different software versions on the
active and standby “supervisor engines”, and it lists any incompatibilities. This MIB uses the following
two tables to check the software and list any incompatibilities:
• CiscoImageCheckOpTable—An operations table that invokes a command to check the images.
• CiscoImgChkResultsTable—A read-only table that displays any incompatibilities discovered.
CISCO-IMAGE-MIB
This MIB identifies the capabilities and characteristics of the running image.