Cisco MDS 9000 Family MIB Quick Reference (OL-18087-01, February 2009)

Send documentation comments to [e-mail]
51
Cisco MDS 9000 Family MIB Quick Reference
OL-18087-01, Cisco MDS NX-OS Release 4.x
Supported Notifications
GS4/SW3 allows zoning to operate in either basic or enhanced mode of operation. Basic mode is
essentially the GS3/SW2 compatible mode (as modeled by CISCO-ZS-MIB). Enhanced mode provides
additional capabilities. In enhanced mode of operation, all the configuration should be done within the
scope of a session.
CISCO-ZS-MIB
This MIB manages zoning within the framework of the Cisco zone server architecture, which realizes
the FC-GS3 requirements for the zone server (ZS). Additionally, the Cisco ZS allows for configuration
of LUN zoning, which is an extension to the ZS standard specified by FC-GS3.
Supported Notifications
Cisco NX-OS and SAN-OS supports many notifications that are available in the supported MIBs. This
section lists each of these notifications.
Table 19 Supported Notifications for Cisco NX-OS Release 4.x
MIB Notification OID
CISCO-CONFIG-MAN-MIB.my
(No other mib objects are supported in the
CISCO-CONFIG-MAN-MIB)
ccmCLIRunningConfigChanged 1.3.6.1.4.1.9.9.43.2.0.2
CISCO-IF-EXTENSION-MIB.my cieDelayedLinkUpDownNotif .1.3.6.1.4.1.9.9.276
Table 20 Supported Notifications for Cisco SAN-OS Release 3.x
MIB Notification OID
CISCO-AAA-SERVER-MIB.my casServerStateChange .1.3.6.1.4.1.9.10.56.2.0.1
CISCO-CALLHOME-MIB.my ccmSmtpServerFailNotif .1.3.6.1.4.1.9.9.300.0.1
ccmAlertGroupTypeAddedNotif .1.3.6.1.4.1.9.9.300.0.2
ccmAlertGroupTypeDeletedNotif .1.3.6.1.4.1.9.9.300.0.3
CISCO-CFS-MIB.my ciscoCFSFeatureActionNotif .1.3.6.1.4.1.9.9.433.0.1
ciscoCFSMergeFailNotif .1.3.6.1.4.1.9.9.433.0.2
ciscoCFSDiscoveryCompleteNotif .1.3.6.1.4.1.9.9.433.0.3
CISCO-CONFIG-COPY-MIB.my ccCopyCompletion .1.3.6.1.4.1.9.9.96.2.1.1
CISCO-DM-MIB.my dmDomainIdNotAssignedNotify .1.3.6.1.4.1.9.9.302.1.3.0.1
dmNewPrincipalSwitchNotify .1.3.6.1.4.1.9.9.302.1.3.0.2
dmFabricChangeNotify .1.3.6.1.4.1.9.9.302.1.3.0.3