Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(3) (OL-14116-11, April 2009)

Send documentation comments to [e-mail]
26
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(3)
OL-14116-11
New Features in Cisco MDS SAN-OS Release 3.3(3)
Before downgrading, disable all features not supported by the downgrade release. Use the show
incompatibility system downgrade-image CLI command to determine what features you need to
disable.
Following the downgrade, you will need to enable features with the feature-name enable command, such
as the iscsi enable command. In NX-OS 4.1(x) releases, features are enabled with the feature
feature-name command, such as the feature iscsi command.
New Features in Cisco MDS SAN-OS Release 3.3(3)
This section briefly describes the new features introduced in this release. For detailed information about
the features listed, refer to the Cisco MDS 9000 Family CLI Configuration Guide, Release 3.x, the Cisco
MDS 9000 Family Fabric Manager Configuration Guide, and the Cisco MDS 9000 Family Storage
Media Encryption Configuration Guide. For information about new CLI commands associated with
these features, refer to the Cisco MDS 9000 Family Command Reference. The “New and Changed
Information” section in each of these books provides a detailed list of all new features and includes links
to the feature description or new command.
Note These release notes are specific to this release. For the complete Release 3.x documentation set, see the
“Related Documentation” section.
There are no new features in Cisco MDS SAN-OS Release 3.3(3).