Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

B-7
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Appendix B Technical Specifications
General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
Cisco 10-Gbps Fibre Channel X2 Transceivers
Table B-8 lists the Cisco10-Gbps Fibre Channel X2 transceivers.
General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
Table B-9 provides the general specifications for Cisco 10-Gbps Fibre Channel X2 transceivers.
Note The minimum cable distance for all the transceivers such as, multi mode fiber (MMF) and single-mode
fiber (SMF), except CX4 is 2 meters (6.5 feet).
Environmental Conditions and Power Requirement Specifications for Cisco 10-Gbps Fibre Channel
X2 Transceivers
Table B-10 provides the power requirement specifications for Cisco 10-Gbps Fibre Channel X2
transceivers.
Table B-8 Cisco 10-Gbps Fibre Channel X2 Transceivers
Transceiver Module
Product Number Description Type
DS-X2-FC10G-SR 10-Gbps Fibre Channel SR, X2, SC Short Reach
DS-X2-FC10G-LR 10-Gbps Fibre Channel LR, X2, SC Long Reach
DS-X2-FC10G-ER 10-Gbps Fiber Channel ER, X2, SC Extended Reach
DS-X2-FC10G-CX4 10-Gbps Fiber Channel Copper, X2, CX4 –
Table B-9 General Specifications for the Cisco 10-Gbps Fibre Channel X2 Transceivers
X2
Wavelength
(nanometer) Fibre Type
Core Size
(micon)
Baud Rate
(GBd) Cable Distance
DS-X2-FC10G-SR 850 MMF 62.5 10.51875 33 m (108 ft)
50.0 (OM3) 10.51875 300 m (984 ft)
DS-X2-FC10G-LR 1310 SMF 9.0 10.51875 24.8 miles (40 km)
DS-X2-FC10G-ER 1550 SMF 9.0 10.51875 6.2 miles (10 km)
DS-X2-FC10G-CX4 – Copper – 10.51875 15 m (49.2 ft)
Table B-10 Power Requirement Specifications for Cisco 10-Gbps Fibre Channel X2 Transceivers
X2
Average Transmit
Power (dBm)
Average Receive
Power (dBm) Fiber Loss Budget (dBm)
Maximum Minimum Maximum Minimum
DS-X2-FC10G-SR -1.2 -7.3 -1.0 -9.9 2.6 (50.0 micron-OM3)
DS-X2-FC10G-LR 0.5 -8.2 0.5 -14.4 6.2
DS-X2-FC10G-ER 4.0 -4.7 -1.0 -15.8 11.1