Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

B-8
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Appendix B Technical Specifications
General Specification for Cisco 10-Gbps Fibre Channel X2 Transceivers
Note DS-X2-FC10G-CX4 is not an optical module; therefore, it is not listed in Table B-10.
Table B-11 provides the environmental specifications for the Cisco 10-Gbps Fibre Channel X2
transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco 10-Gbps Ethernet X2 Transceivers
Table B-12 lists the Cisco 10-Gbps Ethernet X2 transceivers.
General Specification for Cisco 10-Gbps Ethernet X2 Transceivers
Table B-13 provides the general specifications for Cisco 10-Gbps Ethernet X2 transceivers.
Note The minimum cable distance for the MMF transceiver listed above is 2 meters (6.5 feet).
Table B-11 Environmental Specifications for the Cisco 10- Gbps Fibre Channel X2 Transceivers
X2 Operating Storage
Maximum Minimum Maximum Minimum
DS-X2-FC10G-SR 40°C 0°C 85°C -40°C
DS-X2-FC10G-LR 40°C 0°C 85°C -40°C
DS-X2-FC10G-ER 40°C 0°C 85°C -40°C
DS-X2-FC10G-CX4 40°C 0°C 85°C -40°C
Table B-12 Cisco 10-Gbps Ethernet X2 Transceivers
Transceiver Module
Product Number Description Type
DS-X2-E10G-SR 10-Gbps Ethernet Short Reach, X2, SC Short reach
Table B-13 General Specifications for the Cisco 10-Gbps Ethernet X2 Transceivers
X2
Wavelength
(nanometer) Fiber Type
Core Size
(micon)
Baud Rate
(GBd) Cable Distance
DS-X2-E10G-SR 850 MMF 62.5 10.3125 33 (108 ft)
50.0 (OM3) 10.3125 300 (984 ft)