Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

B-19
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Appendix B Technical Specifications
SFP Transceiver Specifications
• When interoperating a Cisco 4-Gbps CWDM SFP transceiver with a Cisco 1/2-Gbps CWDM
transceiver, the speed of ports on the Cisco 4-Gbps CWDM SFP transceiver must be manually
configured to 1-Gbps or 2-Gbps.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Cisco Gigabit Ethernet Transceivers
Cisco Systems provides a 1-Gbps Gigabit Ethernet SFP transceiver used on the Cisco MDS 9000 IPS
modules. Table B-34 lists the transceiver supported on the Cisco MDS 9216.
Note DS-SFP-GE-T is not supported on Cisco MDS 9222.
General Specifications for Cisco Gigabit Ethernet Transceivers
Table B-35 provides the general specification for the Cisco Gigabit Ethernet SFP transceiver.
Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet Transceivers
Table B-36 provides the environmental specifications for the Cisco Gigabit Ethernet transceivers.
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
Table B-34 Cisco Gigabit Ethernet SFP Transceivers
Transceiver Module Product Number Description
DS-SFP-GE-T 1-Gbps Ethernet SFP
Table B-35 General Specification for the Cisco Gigabit Ethernet SFP Transceivers
SFP Cable Type Cable Distance
DS-SFP-GE-T Category 5 UTP 100 m (328 ft)
Table B-36 Environmental Specifications for Cisco Gigabit Ethernet Transceivers
SFP
Operating Storage
Maximum Minimum Maximum Minimum
DS-SFP-GE-T 40°C 0°C 85°C -40°C