Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

Index
IN-4
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
M
maintaining
fiber optic cables
3-13
SFP transceivers 3-13
maintenance records D-1
MGMT 10/100/1000 Ethernet port
cabling
C-5
pinouts C-5
MGMT 10/100 Ethernet port
cabling
C-6
connecting (figure) 3-5
connecting (procedure) 3-5
pinouts C-6
MPS-14/2
figure
1-23
LEDs (table) 1-23
N
network connections, preparing 3-2
new and changed information (table) 1-9
O
open racks, standard (requirements) A-3
P
physical specifications (table) B-2
pinouts
COM 1 port
C-4
console port C-2
MGMT 10/100/1000 Ethernet port C-5
MGMT 10/100 Ethernet port C-6
plugs supported for power supplies C-8
ports
COM1
3-4
console 3-2
Fibre Channel 3-5
MGMT 10/100 3-5
potting 1-20
power cord, jumper C-12
power cords, length C-8
power-on
front panel LEDs
1-27
power supplies
description
1-33
figure 1-33
installing (procedure) 2-36
LED (table) 1-33
removing (procedure) 2-36
specifications B-4
supported plugs C-8
Preface 1-13
pre-installation
guidelines
2-2
options 2-2
required equipment 2-4
unpacking the switch 2-4
R
rack-mount installation
guidelines
A-4
kit 2-5
procedures 2-5
specifications A-4
ready
front panel LEDs
1-27
records
chassis and module information
D-4
contact and site information D-3
site planning and maintenance D-1