Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

Index
IN-5
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
removing
chassis from rack
2-40
SFP transceiver cables 3-12
SFP transceivers 3-10
X2 transceivers 3-8
S
self-test passed
front panel LEDs
1-27
self-test running
front panel LEDs
1-27
services modules
ASM
1-28
downloading binary image 1-29
installing (procedure) 2-33
IPS-4 1-24
IPS-8 1-24
MPS-14/2 1-22
MSFM-18/4 1-20
MSM-18/4 1-20
removing (procedure) 2-32
specifications B-2
SSM 1-26
SFP transceivers
cabling
3-11, 3-12
CWDM 1-36, B-15
description 1-35, 1-36, 3-8, B-9
Fibre Channel 1-35
Fibre Channel/Gigabit Ethernet 1-35
Fibre Channel/Gigabit Ethernet supported B-13
Fibre Channel specifications B-10
Fibre Channel supported B-10
Gigabit Ethernet 1-36
installing 3-9
installing a cable 3-11
latches supported 3-9
maintaining fiber optic cables 3-13
maintaining fiber optic cables (procedures) 3-13
removing 3-10
removing a cable (procedure) 3-12
specifications B-9
supported 1-34
shelf bracket
installation (four-post EIA rack)
A-7
installation (telco/IEA) A-6
installing switch A-8
removing kit A-9
telco/EIA kit (note) A-4
site planning, preparation checklist D-1
software release requirement 1-2
specifications
airflow
B-2
cables C-1
environmental B-1
heat dissipation B-4
modules B-2
physical B-2
pinouts C-1
power B-4
power requirements B-4
SFP transceivers B-9