Cisco MDS 9200 Series Hardware Installation Guide (OL-16188-01, April 2008)

1-2
Cisco MDS 9200 Series Hardware Installation Guide
OL-16188-01
Chapter 1 Product Overview
Chassis
Note The Cisco MDS 9200 Series requires Cisco MDS SAN-OS Release 2.0(x) or later. The Cisco MDS
9222i Switch requires MDS SAN-OS Release 3.2(1)
The following hot-swappable, field-replaceable modules are supported by the Cisco MDS 9200 Series:
• 48-port 4-Gbps Fibre Channel switching module (DS-X9148)
• 24-port 4-Gbps Fibre Channel switching module (DS-X9124)
• 12-port 4-Gbps Fibre Channel switching module (DS-X9112)
• 4-port 10-Gbps Fibre Channel switching module (DS-X9704)
• 32-port 2-Gbps Fibre Channel switching module (DS-X9032)
• 16-port 2-Gbps Fibre Channel switching module (DS-X9016)
• 18/4-port Multiservice (MSM-18/4) module (DS-X9304-18K9)
• 18/4-port Multiservice FIPS (MSFM-18/4) module (DS-X9304-18FK9
• 14/2-port Multiprotocol Services (MPS-14/2) module (DS-X9302-14K9)
• 8-port IP Storage Services (IPS-8) module (DS-X9308-SMIP)
• 4-port IP Storage Services (IPS-4) module (DS-X9304-SMIP)
• Storage Services Module (SSM) (DS-X9032-SSM)
• Advanced Services Module (ASM) (DS-X9032-SMV)
• Caching Services Module (CSM) (DS-X9560-SMC)
This chapter includes the following sections:
• Chassis, page 1-2
• Cisco MDS Fibre Channel Bladeswitch for IBM Blade Center, page 1-5
• Integrated Supervisor Modules, page 1-5
• Interface Modules, page 1-10
• Cisco MDS 9000 Family Module Compatibility, page 1-12
• Switching Modules, page 1-12
• Services Modules, page 1-20
• Fan Module, page 1-35
• Supported Transceivers, page 1-35
Chassis
The Cisco MDS 9200 Series switches have a two-slot chassis. The Cisco MDS 9222i (see Figure 1-1)
has a nonremovable supervisor module (in slot 1) with an integrated 18-port Fibre Channel switching
and 4-port Gigabit Ethernet IP services module, and a modular expansion slot to host Cisco MDS 9000
Family Switching and Services modules. See the “Cisco MDS 9222i Integrated Supervisor Module”
section on page 1-6.
The Cisco MDS 9216i (see Figure 1-2) has a nonremovable supervisor module (in slot 1) with an
integrated 14-port Fibre Channel and 2-port Gigabit Ethernet switching module. See the “Cisco MDS
9216i Integrated Supervisor Module” section on page 1-6.