Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(1c) (OL-14116-08, July 2008)

Send documentation comments to [e-mail]
28
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(1c)
OL-14116-08
Caveats
Emulex Driver Version
In some instances, the Emulex driver version 8.1.10.9 may set the task attribute to HEAD_OF_QUEUE
instead of SIMPLE_QUEUE. Certain tape drives do not accept this attribute and may reject these
commands. The Emulex driver version 8.1.10.12 does not have this issue.
Cisco MDS 9222i Module Upgrade
On the MDS 9222i module, an upgrade from SAN-OS Release 3.2(x) to Release 3.3(1c) is not supported
if there is a Cisco SME or Cisco DMM configuration in the fabric for hosts and targets attached to the
MDS 9222i module.
SANTap
The SANTap feature allows third party data storage applications, such as long distance replication and
continuous backup, to be integrated into the SAN. SANTap is not supported in Release 3.3(1c).
Caveats
This section lists the open and resolved caveats for this release. Use Table 11 to determine the status of
a particular caveat. In the table, “O” indicates an open caveat and “R” indicates a resolved caveat.
Table 11 Open Caveats and Resolved Caveats Reference
DDTS Number
Software Release (Open or
Resolved)
Software Release (Open or
Resolved)
3.3(1a) 3.3(1c)
Severity 2
CSCsc17059 OO
CSCsg49151 OO
CSCsi72048 OO
CSCsk43922 OO
CSCsk49029 OO
CSCsk49634 OO
CSCsk51193 OO
CSCsl32492 OO
CSCsl39215 OO
CSCsl71227 OO
CSCsm54544 OO
CSCso28570 OO
CSCso41087 OO
CSCso62525 OR