Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
7-10
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Chapter 7 Using the Command Line Interface to Configure SME
Viewing Cisco SME Cluster, Internal, and Transport Information
Tape volumegroup is Default
Key Type is tape volumegroup wrap key
GUID is 3e9ef70e0185bb3c-ad12-c4e489069634
Cluster is clustername1, Tape backup group is HR1
Tape volumegroup is Default
Key Type is master key
GUID is 8c57a8d82d2098ee-3b27-6c2b116a950e
Cluster is clustername1, Master Key Version is 0
Viewing Cluster Node Information
Use the show sme cluster node command to view information about a local or remote switch.
A sample output of the show sme cluster node command follows:
switch# show sme cluster clustername1 node
Node switch is local switch
Node ID is 1
Status is online
Node is the master switch
Fabric is f1
Viewing Recovery Officer Information
You can view information about a specific Recover Officer or for all Recovery Officers for a specific
cluster.
switch# show sme cluster clustername1 recovery officer
Recovery Officer 1 is set
Master Key Version is 0
Recovery Share Version is 0
Recovery Share Index is 1
Recovery Scheme is 1 out of 1
Recovery Officer Label is
Recovery share protected by a password
Key Type is master key share
Cluster is clustername1, Master Key Version is 0
Recovery Share Version is 0, Share Index is 1
switch# show sme cluster clustername1 summary
-------------------------------------------------------------------------------
Cluster ID Security Mode Status
-------------------------------------------------------------------------------
clustername1 2e:00:00:05:30:01:ad:f4 basic online