Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
9-3
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Chapter 9 Cisco SME Troubleshooting
Cluster Recovery Scenarios
On the offline switch (switch2), shut down the cluster by performing this task:
Note Repeat the procedure for every offline switch.
On the cluster master switch, delete the offline switch (switch2) and then delete the cluster by
performing this task:
On the offline switch (switch2), delete the cluster by performing this task:
Note Delete the cluster on every offline switch that was shut down in the first procedure.
Deleting a Cisco SME Cluster when All Switches Are Offline
To delete a Cisco SME cluster when the master switch and all other switches are offline, use these
procedures.
Note When all switches are offline, the cluster is offline.
On the offline switch (for example, switch2), shut down the cluster by performing this task:
Note Repeat this procedure for every offline switch.
Command Purpose
Step 1
switch# config t
Enters configuration mode.
Step 2
switch(config)# sme cluster ABC
switch(config-sme-cl)# shutdown
Shuts down the ABC cluster on the offline switch
Command Purpose
Step 1
switch# config t
Enters configuration mode.
Step 2
switch(config)# sme cluster ABC
switch(config-sme-cl)# no node
switch2
Deletes switch2 from the ABC cluster configuration.
Note Repeat this step for every offline switch that was
shut down in the first procedure.
Step 3
switch(config)# no sme cluster ABC
Deletes the ABC cluster configuration.
Command Purpose
Step 1
switch# config t
Enters configuration mode.
Step 2
switch(config)# no sme cluster ABC
Deletes the ABC cluster configuration.
Command Purpose
Step 1
switch# config t
Enters configuration mode.
Step 2
switch(config)#sme cluster ABC
switch(config-sme-cl)#shutdown
Shuts down the ABC cluster on the offline switch.