Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-4
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
cluster
cluster
To configure a cluster feature, use the cluster command.
cluster enable
Syntax Description
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines Starting from Cisco NX-OS 4.x release, the cluster command is replaced by the feature command.
Examples The following example enables the Cisco SME clustering:
switch# config terminal
switch(config)# cluster enable
switch(config)#
Related Commands
enable Enables or disables a cluster.
Release Modification
3.2(2) This command was introduced.
NX-OS 4.1(1b) This command was deprecated.
Command Description
show sme cluster Displays information about the Cisco SME cluster.