Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-34
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
show fc-redirect peer-switches
show fc-redirect peer-switches
To display all the peer switches in the fabric running FC-Redirect, use the show fc-redirect
peer-switches command.
show fc-redirect peer-switches
Syntax Description This command has no other keywords or arguments.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines This command is used for verifying the fabric state and for troubleshooting.
Note To find the switch IP address for the list of switch WWNs, use the show cfs peers command.
Examples The following example displays the peer switches in the fabric running FC-Redirect:
switch# show fc-redirect peer-switches
------------------------------------------------
num Switch WWN State
------------------------------------------------
1 20:00:00:05:30:00:90:9e UP
2 21:00:00:05:30:00:90:9f DOWN
3 22:00:00:05:30:00:90:91 SYNCING
4 23:00:00:05:30:00:90:92 ERROR
This table shows FC-Redirect peer switches summaries.
Release Modification
3.2(2c) This command was introduced.
Field Description
Up The peer switch is fully synced with the local switch.
Down The communication with peer switch is broken.
Syncing The local switch is syncing its configuration with the peer switch.
Error Connection with peer switch is not available.