Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-46
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
shutdown (Cisco SME cluster configuration submode)
shutdown (Cisco SME cluster configuration submode)
To disable a cluster for recovery, use the shutdown command. To enable the cluster for recovery, use the
no form of the command.
shutdown
no shutdown
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Cisco SME cluster configuration submode.
Command History
Usage Guidelines To disable operation of a cluster for the purpose of recovery, use the shutdown command. To enable the
cluster for normal usage, use the no shutdown command.
The default state for clusters is no shutdown. Use the shutdown command for cluster recovery. See the
Chapter 9, “Cisco SME Troubleshooting” for additional details about recovery scenarios.
Examples The following example restarts the cluster after recovery is complete:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no shutdown
The following example disables the cluster operation in order to start recovery:
switch# config t
switch(config))# sme cluster c1
switch(config-sme-cl)# shutdown
Related Commands
Release Modification
3.2(2c) This command was introduced.
Command Description
show sme cluster Displays information about the Cisco SME cluster.