Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-51
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
tape-device
tape-device
To configure a crypto tape device, use the tape-device command. To disable this feature, use the no form
of the command.
tape-device device name
no tape-device device name
Syntax Description
Defaults None.
Command Modes Cisco SME tape volume configuration submode.
Command History
Usage Guidelines The tape device commands are available in the (config-sme-cl-tape-bkgrp-tapedevice) submode.
Examples The following example configures a crypto tape device:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)# tape-device devicename1
switch(config-sme-cl-tape-bkgrp-tapedevice)#
The following example removes a crypto tape device:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)# no tape-device devicename1
switch(config-sme-cl-tape-bkgrp-tapedevice)#
Related Commands
device name Specifies the name of the tape device.
Release Modification
3.2(2c) This command was introduced.
Command Description
clear sme Clears Cisco SME configuration.
show sme cluster Displays information about the Cisco SME cluster.
show sme cluster tape Displays information about all tape volume groups or a specific group.