Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
A-53
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands
tape-volgrp
tape-volgrp
To configure the crypto tape volume group, use the tape-volgrp command. To disable this command,
use the no form of the command.
tape-volgrp group name
no tape-volgrp group name
Syntax Description
Defaults None.
Command Modes Cisco SME crypto backup tape group configuration submode.
Command History
Usage Guidelines The tape volume group commands are available in the Cisco SME crypto tape volume group
(config-sme-cl-tape-bkgrp-volgrp) submode.
Examples The following example configures a crypto tape volume group:
switch# config t
switch(config))# sme cluster c1
switch(config-sme-cl)# tape-bkgrp tbg1
switch(config-sme-cl-tape-bkgrp)# tape-volgrp tv1
switch(config-sme-cl-tape-bkgrp-volgrp)#
The following example removes a crypto tape volume group.
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp tbg1
switch(config-sme-cl-tape-bkgrp)# no tape-volgrp tv1
Related Commands
group name Specifies the tape volume group name.
Release Modification
3.2(2c) This command was introduced.
Command Description
clear sme Clears Cisco SME configuration.
show sme cluster tape Displays information about tapes.