Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
2-4
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Chapter 2 Getting Started
Before You Begin
Step 1 In the Physical Attributes pane, select End Devices > SME Clusters.
Step 2 From the Control tab in the information pane, locate the switch.
Step 3 From the drop-down menu in the Command column, select enable. The default is noSelection.
Note You can select enable on multiple switches, and then click Apply.