Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
2-6
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Chapter 2 Getting Started
Before You Begin
Enabling Cisco SME
You can enable Cisco SME using Fabric Manager or Device Manager.
Note Be sure to enable clustering first, and then enable Cisco SME.
This section includes the following topics:
• Enabling Cisco SME Using Fabric Manager, page 2-6
• Enabling Cisco SME Using Device Manager, page 2-7
Enabling Cisco SME Using Fabric Manager
To enable Cisco SME using Fabric Manager, follow these steps:
Step 1 In the Physical Attributes pane, select End Devices > SME Clusters.
Step 2 From the Control tab in the information pane, locate the switch.
Step 3 From the drop-down menu in the Command column, select enable. The default is noSelection.