Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
2-13
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Chapter 2 Getting Started
Before You Begin
Note To configure Cisco SME in a dual fabric environment, all the switches in the cluster should have the same
credentials for SME user.
Cisco SME requires the HTTPS protocol on the Cisco MDS 9000 switch with an MSM-18/4 module
installed. You must enable HTTPS during the Fabric Manager installation. To enable HTTPS, refer to
the installation information in the
Cisco MDS 9000 Family Fabric Manager Configuration Guide.
Adding a Fabric and Changing the Fabric Name
You need to add the fabric that includes the Cisco MDS switch with the MSM-18/4 module installed. Or
you also can add a fabric that includes an MDS 9222i switch.
Note Cisco MDS SAN-OS Release 3.2(2c) or later, or Cisco NX-OS 4.x supports one cluster per switch. You
will want to consider this during your planning.
To add a fabric using Fabric Manager Web Server, follow these steps:
Step 1 Log in to Fabric Manager Web Client.
Step 2 Click the Admin tab.
Step 3 Click Configure.
Step 4 Click Add.
The Add Fabric seed switch screen displays fields to log in to the fabric seed switch.