Cisco MDS 9000 Family Storage Media Encryption Configuration Guide - Release 4.x (OL-18091-01, February 2009)

Send documentation comments to [e-mail]
4-10
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
OL-18091-01, Cisco MDS NX-OS Release 4.x
Chapter 4 Cisco SME Cluster Management
Creating a Cisco SME Cluster Using the Cisco SME Wizard
For information about primary and secondary servers, see the “High Availability Key Management
Center” section on page 6-5.
Selecting Transport Settings
In the Transport Settings screen, to enable Transport Settings, select On. If enabled, specify the Trust
Point from the drop-down menu.
For more information about Trust Points, see the Cisco MDS 9000 Family CLI Configuration Guide.
To enable Transport settings, select On.
If On is selected in the Transport Setting, SSL is enabled on KMC with the following results:
• New clusters are created. If Off is selected, cluster creation fails.
• Previously created clusters are updated by enabling SSL with trustpoint on the switches. KMC
server connection state remains as ‘none’ until the cluster is updated.
To disable Transport Settings, select Off.