Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, February 2009)

Send documentation comments to [e-mail]
vii
Cisco MDS 9100 Series Hardware Installation Guide
OL-17951-02
New and Changed Information
This Cisco MDS 9100 Series Hardware Installation Guide applies to Cisco MDS NX-OS Release
4.1(1b) and earlier Cisco MDS SAN-OS releases.
Table 1 lists the new and changed features available with each supported Cisco MDS NX-OS release and
SAN-OS release for the Cisco MDS 9100 Series, with the latest release first.
Note As of NX-OS Release 4.1(1b), SAN-OS has been changed to NX-OS. References to SAN-OS releases
before 4.1(1b) still apply.
Table 1 Documented Features for the Cisco MDS 9100 Series
Feature Description
Changed in
Release Where Documented
The new DC
power supply
Description of removing and
installing the new DC power
supply.
Not release
specific
Installing the Cisco MDS
9100 Series chapter.
The Cisco MDS
9120 and the
Cisco MDS
9140 switch
support
Note that states that the Cisco
MDS 9120 and the Cisco MDS
9140 Fibre Channel switches are
not supported on NX-OS Release
4.1(1b).
4.1(1b) Product Overview
chapter.
Cisco MDS
Fibre Channel
Bladeswitch
overview
Description of the Cisco MDS
Fibre Channel Bladeswitch for
IBM BladeCenter.
3.3(1a) Product Overview
chapter.
Cisco MDS
9134 Switch
overview
Description of NPIV support. 3.2(2c) Product Overview
chapter.
Cisco MDS
9124 Switch
overview
Description of NPIV support. 3.2(2c) Product Overview
chapter.
Cisco MDS
9134 Switch
overview
Description and illustrations of the
32-port 4-Gbps and 2-port
10-Gbps Cisco MDS 9134 Switch.
3.2(1) Product Overview
chapter.