Cisco MDS 9100 Series Hardware Installation Guide (OL-17951-02, February 2009)

Send documentation comments to [e-mail]
viii
Cisco MDS 9100 Series Hardware Installation Guide
OL-17951-02
New and Changed Information
Cisco MDS
9134 Switch
installation
Description and illustrations of
installing the Cisco MDS 9134
Switch and removing it.
3.2(1) Installing the Cisco MDS
9100 Series chapter.
Cisco MDS
9134 Switch
specifications
Switch specifications for the Cisco
MDS 9134 Switch, including
power supply requirements, heat
dissipation specifications, and X2
Transceiver Specifications.
3.2(1) Technical Specifications
appendix.
Cisco MDS
9124 Switch
Additional illustrations of the
24-port Cisco MDS 9124 Switch.
Not release
specific
Installing the Cisco MDS
9100 Series chapter.
Troubleshooting Troubleshooting chapter removed. Not release
specific
For troubleshooting
information, see the Cisco
MDS 9000 Family
Troubleshooting Guide.
Cisco MDS
9124 Switch
The 24-port Cisco MDS 9124
Switch.
3.1(1) This guide.
Rear-facing
chassis
installation
Chassis installation for a cabinet
with insufficient front side
clearance.
Not release
specific
Installing the Switch in a
Cabinet with Insufficient
Front Clearance,
page 2-11.
Jumper power
cord
Jumper power cord available for
use in cabinet.
Not release
specific
Jumper Power Cord,
page C-5.
Telco and EIA
Shelf Bracket
Kit
A 2-RU shelf bracket kit that
allows single-user installation and
installation in a Telco rack.
Not release
specific
Cisco MDS 9000 Family
Telco and EIA Shelf
Bracket, page A-3.
Console port to
modem
connection
Support for connecting the console
port on the Cisco MDS 9100
Series to a modem.
1.2(2a) Connecting the Console
Port, page 3-1.
Cisco MDS
9100 Series
The 20-port Cisco MDS 9120
Switch and the 40-port Cisco MDS
9140 Switch.
1.2(1a) This guide.
Table 1 Documented Features for the Cisco MDS 9100 Series (continued)
Feature Description
Changed in
Release Where Documented