Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1) (OL-14116-01-D0, September 2007)
Send documentation comments to mdsfeedback-doc@cisco.com
11
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.2(1)
OL-14116-01
Upgrading Your Cisco MDS SAN-OS Software Image
http://www.cisco.com/en/US/products/ps5989/products_device_support_table09186a00805037ee.html
Upgrading Your Cisco MDS SAN-OS Software Image
This section lists the guidelines recommended for upgrading your Cisco MDS SAN-OS software image
and contains the following sections:
• Upgrading Your Version of Cisco Fabric Manager, page 11
• Upgrading an MDS 9216 Switch with iSCSI Enabled, page 16
• Upgrading with IVR Enabled, page 16
• Reconfiguring SSM Ports Before Upgrading to SAN-OS Release 3.2(1), page 17
• Upgrading the SSI Image on Your SSM, page 19
• Upgrading a Switch with Insufficient Space for Two Images on the Bootflash, page 19
• Upgrading a Cisco MDS 9124 Switch, page 20
• Performing a Disruptive Upgrade on a Single Supervisor MDS Family Switch, page 20
Upgrading Your Version of Cisco Fabric Manager
As of Cisco SAN-OS Release 3.2(1), Cisco Fabric Manager is no longer packaged with a Cisco MDS 9000
Family switch. It is included on the CD-ROM that ships with the switch. You can install Fabric Manager from
the CD-ROM or from files that you download. For a complete description of the changes in Fabric Manager,
see the “Cisco Fabric Manager Enhancements” section on page 27.
Installing Cisco Fabric Manager is a multi-step process that involves installing a database, as well as Fabric
Manager. The complete installation instructions are provided in the “Installation of Cisco MDS SAN-OS and
Fabric Manager” section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide, and are
available on-screen once you launch the Fabric Manager installer from the CD-ROM.
The following section presents the flow of the installation process at a high level. Review these guidelines
before you begin the installation process.
1. Verify supported software. Cisco Fabric Manager has been tested with the following software:
• Windows 2000 SP4, 2003 SP2, XP SP2
• Redhat Linux (2.6 Kernel)
• Solaris (SPARC) 8 and 10
• VMWare Server 1.0:
–
Base Operating System: Windows 2000 SP4 / Virtual Operating System: Windows XP SP2
–
Base Operating System: Windows 2000 SP4 / Virtual Operating System: Windows 2000 SP4
• Java Sun JRE and JDK 1.5(x) are supported
• Java Web Start 1.2, 1.0.1, and 1.5
• Firefox 1.5 and 2.0
• Internet Explorer 6.x, and 7.0
Note Internet Explorer 7.0 is not supported on Windows 2000 SP4.