Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4d) (OL-21012-06 B0, May 2011)

Send documentation comments to [e-mail]
14
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4d)
OL-21012-06
Software Download Process
------ -------- -------------- ------------ ------
1 yes non-disruptive rolling
2 yes disruptive rolling Hitless upgrade is not supported
3 yes disruptive rolling Hitless upgrade is not supported
4 yes non-disruptive rolling
5 yes non-disruptive reset
6 yes non-disruptive reset
At a minimum, you need to disable the default device alias distribution feature using the no device-alias
distribute command in global configuration mode. The show incompatibility system bootflash:system
image filename command determines which additional features need to be disabled.
Note If you would like to request a copy of the source code under the terms of either GPL or LGPL, please
send an e-mail to [e-mail].
Selecting the Correct Software Image for an MDS 9100 Series Switch
The system and kickstart image that you use for an MDS 9100 series switch depends on which switch
you use, as shown in Table 8.
Selecting the Correct Software Image for an MDS 9200 Series Switch
The system and kickstart image that you use for an MDS 9200 series switch depends on which switch
you use, as shown in Table 9.
Table 8 Software Images for MDS 9100 Series Switches
Cisco MDS 9100 Series Switch Type Naming Convention
MDS 9134, 9124, Cisco Fabric Switch for
HP c-Class BladeSystem, Cisco Fabric
Switch for IBM BladeCenter
Filename begins with m9100-s2ek9
MDS 9148 Filename begins with m9100-s3ek9
Table 9 Software Images for MDS 9200 Series Switches
Cisco MDS 9200 Series Switch Type Naming Convention
MDS 9222i Filename begins with m9200-s2ek9