Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4d) (OL-21012-06 B0, May 2011)

Send documentation comments to [e-mail]
3
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.0(4d)
OL-21012-06
Components Supported
Components Supported
Table 2 lists the NX-OS software part numbers and hardware components supported by the Cisco MDS
9000 Family.
Note To use the Cisco Storage Services Enabler package, Cisco MDS SAN-OS Release 1.3(5) or later must
be installed on the MDS switch.
Table 2 Cisco MDS 9000 Family Supported Software and Hardware Components
Component Part Number Description Applicable Product
Software M95S2K9-5.0.4d MDS 9500 Supervisor/Fabric-2, NX-OS software MDS 9500 Series only
M92S2K9-5.0.4d MDS 9200 Supervisor/Fabric-2, NX-OS software MDS 9222i Switch only
M91S2K9-5.0.4d MDS 9100 Supervisor/Fabric-2, NX-OS software MDS 9124 Switch and
MDS 9134 Switch
M91S3K9-5.0.4d MDS 9148 Supervisor/Fabric-3 NX-OS software MDS 9148 Switch
SSI Interface SSI-M9K9-504d Storage Services Interface for NX-OS Release 5.0(4d) MDS 9000 Family
Licenses M9500SSE184K9 Storage Services Enabler License for one MSM-18/4 module MDS 9500 Series only
M9222ISSE1K9 Storage Services Enabler License MDS 9222i Switch only
M9200SSE184K9 Storage Services Enabler License for one MSM-18/4 module MDS 9200 Series only
M95DMM184K9 Data Mobility Manager License for one MSM-18/4 module MDS 9500 Series only
M9222IDMMK9 Data Mobility Manager License for Cisco MDS 9222i MDS 9222i Switch
M92DMM184K9 Data Mobility Manager License for one MSM-18/4 module MDS 9200 Series only