Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide November 2007 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Contents Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Installing PostgreSQL 3-3 Installing Fabric Manager 3-4 Creating Startup Files in Solaris Installing Device Manager CHAPTER Fabric Manager Client 4 3-5 3-11 4-1 Launching Fabric Manager Client in Cisco SAN-OS Release 3.
Contents Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Contents Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Preface This preface describes the audience, organization, and conventions of the Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide. It also provides information on how to obtain related documentation. Audience This guide is for experienced network administrators who are responsible for configuring and maintaining the Cisco MDS 9000 Family of multilayer directors and fabric switches.
Preface Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Chapter Title Description Appendix B Quick Config Wizard Users can enable or disable zone members per VSAN and configure zones for multiple VSANs using Device Manager. Appendix C Configuring Static Domain IDs and Persistent FC IDs Provides the procedure for configuring static domain IDs and persistent FC IDs.
Preface Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Related Documentation The documentation set for the Cisco MDS 9000 Family includes the following documents. To find a document online, use the Cisco MDS SAN-OS Documentation Locator at: http://www.cisco.com/en/US/products/ps5989/products_documentation_roadmap09186a00804500c1.html.
Preface Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Preface Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Obtaining Documentation, Obtaining Support, and Security Guidelines For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.
Preface Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 1 Overview The primary objective of the Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide is to get you started with configuring your Cisco MDS 9000 Family switch using the Cisco Fabric Manager graphical user interface (GUI).
Chapter 1 Overview Overview of Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Start the process by setting up the hardware and performing the initial switch setup using the CLI. Then install Cisco Fabric Manager, and use it to configure VSANs, interfaces, zones, and zone sets, which are the minimum requirements for creating a fabric.
Chapter 1 Overview Overview of VSANs, Interfaces, Zones, and Zone Sets Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m VSANs and zoning within the MDS 9000 Family of products aid the SAN designer in building secure and manageable networking environments while optimizing the use and cost of switching hardware.
Chapter 1 Overview Overview of VSANs, Interfaces, Zones, and Zone Sets Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 2 Initial Switch Configuration This chapter provides instructions for setting up the hardware, connecting to the console port, and initially configuring the switch from the CLI.
Chapter 2 Initial Switch Configuration Connecting the Console Port Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Connecting the Console Port This section describes how to connect the RS-232 console port to a PC. The console port allows you to perform the following functions: • Configure the switch from the CLI. • Monitor network statistics and errors. • Configure SNMP agent parameters.
Chapter 2 Initial Switch Configuration Connecting the Console Port Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Chapter 2 Initial Switch Configuration Connecting the 10/100 Ethernet Management Port Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Connecting the Console Port to a PC You can connect the console port to a PC serial port for local administrative access to the Cisco MDS 9000 Family switch. Note The PC must support VT100 terminal emulation.
Chapter 2 Initial Switch Configuration Connecting to the MGMT 10/100/1000 Ethernet Port Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m If only the active supervisor module is connected to the LAN and an event occurs that causes a system switchover (such as a software upgrade), the switch becomes unmanageable through the Ethernet port after the active supervisor module reboots and the standby supervisor module becomes the active supervisor module.
Chapter 2 Initial Switch Configuration Using the Switch Setup Utility Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m General Software Pentium III Embedded BIOS 2000 (tm) Revision 1.1.(0) (C) 2002 General Software, Inc.ware, Inc. Pentium III-1.1-6E69-AA6E +------------------------------------------------------------------------------+ | System BIOS Configuration, (C) 2002 General Software, Inc.
Chapter 2 Initial Switch Configuration Using the Switch Setup Utility Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Would you like to enter the basic configuration dialog (yes/no): yes The switch setup utility guides you through the basic configuration process. Press Ctrl-C at any prompt to end the configuration process. Step 6 Enter no (no is the default) to not create any additional accounts.
Chapter 2 Initial Switch Configuration Using the Switch Setup Utility Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Step 18 Enter on (on is the default) to configure the switch port trunk mode. Configure default switchport trunk mode (on/off/auto) [on]: on Step 19 Enter deny (deny is the default) to configure a default zone policy configuration.
Chapter 2 Initial Switch Configuration Verifying the Module Status Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Verifying the Module Status Before you proceed with further configuration of the switch, ensure that the modules in the chassis are functioning as designed. To verify the status of a module at any time, issue the show module command. All the hardware that was physically installed should be displayed.
Chapter 2 Initial Switch Configuration Verifying the Module Status Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 3 Installing Fabric Manager Before installing Fabric Manager, make sure that the hardware setup and initial configuration using the CLI is completed. See Chapter 2, “Initial Switch Configuration,” for details. The Cisco Fabric Manager software executable files reside on every supervisor module of each Cisco MDS 9000 Family switch in your network.
Chapter 3 Installing Fabric Manager Installing the Database Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Installing the Database Before you install Fabric Manager, you must install a database. As of Cisco SAN-OS Release 3.1(2b), you can use Oracle Database 10g Express. Your other choice is PostgreSQL.
Chapter 3 Installing Fabric Manager Installing the Database Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Installing PostgreSQL Note If you choose to install PostgreSQL, you must disable any security software you are running, as PostgreSQL may not install certain folders or users. To install the PostgreSQL database on Windows, follow the instructions in the “Installing Fabric Manager” section on page 3-4.
Chapter 3 Installing Fabric Manager Installing Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Note The installer does not permit any password less than six characters. Choose a strong password that includes both uppercase and lowercase letters, special characters, and numbers. For example, testABC#136. Note Before starting the installation, make sure that you have logged in as a Superuser.
Chapter 3 Installing Fabric Manager Installing Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Step 5 Note Follow the on-screen instructions provided in the Fabric Manager management software setup wizard. Cisco Fabric Manager requires a 32-bit Windows platform. It will not install on a 64-bit Windows platform.
Chapter 3 Installing Fabric Manager Installing Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure 3-1 Welcome to the Management Software Setup Wizard Step 6 Click Next to begin the installation. Step 7 Check the I accept the terms of the License Agreement check box and click Next. You see the Install Options dialog box shown in Figure 3-2.
Chapter 3 Installing Fabric Manager Installing Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Step 10 Click Next. You see the Database Options dialog box shown in Figure 3-3. Figure 3-3 Database Options Dialog Box Step 11 Click the radio button for either Install PostgreSQL or Use existing database and enter a database user name and password.
Chapter 3 Installing Fabric Manager Installing Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure 3-5 Step 15 Choose an authentication mode (Local, RADIUS, TACACS or MDS) and click Next. Note Step 16 Authentication Options Dialog Box When MDS radio button is selected, the FM authentication uses the user database in the switch for authentication. Click Verify to test your login.
Chapter 3 Installing Fabric Manager Installing Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m You see the Configuration Options dialog box for Fabric Manager Server shown in Figure 3-7. Figure 3-7 Step 18 Step 19 Configuration Options Dialog Box Select the local interface, web server port or fm server port and check the FC Alias and SNMPv3 check boxes as desired and click Install if you are installing Fabric Manager Server.
Chapter 3 Installing Fabric Manager Installing Fabric Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure 3-8 Progress of Installation Once the installation is finished, you see an installation completed message in the Cisco Fabric Manager Installer window shown in Figure 3-9.
Chapter 3 Installing Fabric Manager Installing Device Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m If you installed Fabric Manager Server, icons for Fabric Manager and Device Manager are not created on the desktop until you launch Fabric Manager Client. Follow the instructions in the “Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later” section on page 4-1 to launch Fabric Manager Client.
Chapter 3 Installing Fabric Manager Installing Device Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Step 2 Click the Cisco Device Manager link. You see the welcome to the management software setup wizard message in the Cisco Device Manager Installer window shown in Figure 3-11. Figure 3-11 Welcome to the Management Software Setup Wizard Window Step 3 Click Next to begin the Installation.
Chapter 3 Installing Fabric Manager Installing Device Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure 3-12 Progress of Installation Once the installation is finished, you see an installation completed message in the Cisco Device Manager Installer window shown in Figure 3-13. Figure 3-13 Step 7 Install Complete Click Finish to close the Cisco Device Manager Installer window.
Chapter 3 Installing Fabric Manager Installing Device Manager Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 4 Fabric Manager Client The Cisco Fabric Manager Client is a Java-based GUI application that provides easy access to Fabric Manager applications from a remote workstation. This appendix contains the following sections: • Launching Fabric Manager Client in Cisco SAN-OS Release 3.
Chapter 4 Fabric Manager Client Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m You see the Fabric Manager Web Server Login dialog box shown in Figure 4-1. Figure 4-1 Step 2 Fabric Manager Web Server Login Dialog Box Enter your user name and password and click Login. You see the Fabric Manager Web Server Summary page.
Chapter 4 Fabric Manager Client Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure 4-2 Step 4 Fabric Manager and Device Manager Download Page Click the link for either Fabric Manager or Device Manager. If you are launching Fabric Manager Client for the first time, you see a message asking whether you want to create shortcuts for Fabric Manager (see Figure 4-3).
Chapter 4 Fabric Manager Client Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure 4-4 Fabric Manager Login Dialog Box Step 7 Enter the Fabric Manager Server user name and password. Step 8 Check the Use SNMP Proxy check box if you want Fabric Manager Client to communicate with Fabric Manager Server through a TCP-based proxy server. Step 9 Click Login.
Chapter 4 Fabric Manager Client Launching Fabric Manager Client in Cisco SAN-OS Release 3.2(1) and Later Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Note Step 13 If you want a clean discovery, remove the fabric and rediscover it. Click Discover. You see the Control Panel dialog box shown in Figure 4-6.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Fabric Manager Client Quick Tour This section helps you get familiar with the various icons and sections that enable navigation in the Fabric Manager Client interface, as shown in Figure 4-7. Figure 4-7 Fabric Manager Main Window 1 Menu bar—Provides access to options that are organized by menus.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Note As of Cisco MDS SAN-OS Release 2.1(1a), advanced mode is enabled by default and provides the full suite of Fabric Manager features, including security, IVR, iSCSI, and FICON. Uncheck the Advanced check box in the upper right corner of Fabric Manager Client to simplify the user interface.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m The information for both fabrics is displayed, with no need to select a seed switch. To see details of a fabric, select the tab for that fabric at the bottom of the Fabric pane, or double-click the cloud icon for the fabric in the All Fabrics tab. Contents Panes The following sections describe the panes in the Fabric Manager view.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Table 4-1 Fabric Manager Graphics (continued) Icon or Graphic Description iSCSI host. Fibre Channel ISL and edge connection. Fibre Channel PortChannel. IP ISL and edge connection. IP PortChannel. Fibre Channel loop (storage). IP cloud (iSCSI hosts).
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Note When a VSAN, zone, or zone member is selected in the VSAN tree, the map highlighting changes to identify the selected objects. To remove this highlighting, click Clear Highlight on the Fabric pane toolbar or choose Clear Highlight from the pop-up menu.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Table 4-2 Icon Fabric Manager Client Main Toolbar (continued) Description Edits full zone database. Launches IVR zone wizard. Launches PortChannel wizard. Launches FCIP wizard. Launches iSCSI wizard. Launches QoS wizard. Configures users and roles. Launches IP-ACL wizard. Launches License Install wizard.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Table 4-2 Fabric Manager Client Main Toolbar (continued) Icon Description Monitor ISL performance. Show online help. Information Pane The Information pane displays tables of information associated with the option selected from the menu tree in the Logical Domains or Physical Attributes panes.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Table 4-3 Information Pane Toolbar (continued) Icon Description Print Table Prints the contents of the Information pane. Detach Table Displays a non-editable copy of the table in the Information pane in its own window, which you can move around the screen.
Chapter 4 Fabric Manager Client Fabric Manager Client Quick Tour Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m • Security—View and configure MDS management and FC-SP security. • ISLs—View and configure Inter-Switch Links. • End Devices—View and configure end devices. Status Bar The status bar at the bottom of the Fabric Manager window shows the last entry displayed by the discovery process, and the possible error message on the right side.
Chapter 4 Fabric Manager Client Fabric Manager Wizards Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Detachable Tables As of Cisco MDS SAN-OS Release 2.0(2b), Fabric Manager Client has detachable tables. You can detach tables and move them to different areas on your desktop so that you can compare similar tables from different VSANs, or you can keep informational tables open from one view while you examine a different area in Fabric Manager.
Chapter 4 Fabric Manager Client Fabric Manager Wizards Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 5 Configuring VSANs and Interfaces Before configuring VSANs and interfaces, make sure that you have launched and logged into Fabric Manager from your workstation. See Chapter 3, “Installing Fabric Manager,” for details. You can achieve higher security and greater stability in Fibre Channel fabrics by using virtual storage area networks (VSANs).
Chapter 5 Configuring VSANs and Interfaces Creating VSANs Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Creating VSANs VSANs help you create multiple logical SANs over a common physical infrastructure. Each VSAN can contain up to 239 switches and has an independent address space that allows identical Fibre Channel IDs (FC IDs) to be used simultaneously in different VSANs.
Chapter 5 Configuring VSANs and Interfaces Creating VSANs Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m You see the Create VSAN dialog box. (See Figure 5-3.) Figure 5-3 Step 2 Create VSAN Complete the fields in the Create VSAN dialog box. • Select the switches that you wish to assign to the VSAN. For example, in Figure 5-3, switch_name is the switch selected to be assigned to a VSAN. • Select a VSAN ID for the VSAN.
Chapter 5 Configuring VSANs and Interfaces Configuring Interfaces Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Note • Step 3 HP-UX and AIX are two operating systems that utilize the FC ID in the device path to the storage. For the switch to always assign the same FC ID to a device, persistent FC IDs and static Domain ID must be configured for the VSAN. Check the FICON check box if the VSAN is FICON-enabled. Click Create to add the VSAN.
Chapter 5 Configuring VSANs and Interfaces Configuring Interfaces Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Enabling or Disabling Interfaces Note You are not required to enable interfaces if the default state of the ports in the setup script is set to noshut. See the “Using the Switch Setup Utility” section on page 2-5.
Chapter 5 Configuring VSANs and Interfaces Configuring Interfaces Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 6 Configuring Zones and Zone Sets Before setting up zones and zone sets make sure you have configured VSANs and interfaces. See Chapter 5, “Configuring VSANs and Interfaces.” Zoning enables you to set up access control between storage devices or user groups.
Chapter 6 Configuring Zones and Zone Sets Configuring Zones Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m This chapter includes the following sections: • Configuring Zones, page 6-2 • Creating Zone Sets, page 6-4 • What’s Next?, page 6-6 Configuring Zones Zones are configured within VSANs. The Logical tab displays the VSANs configured in the currently discovered fabric.
Chapter 6 Configuring Zones and Zone Sets Configuring Zones Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Step 3 Click Zones then click Insert icon to make a new zone. We recommend that you use meaningful names for a zone. For example, you could use email05_HBA2_EMC_FA11a. (See Figure 6-4.) Figure 6-4 Tip Edit Local Full Zone Database Instead of configuring zones using pWWNs, you can use device aliases as zone members.
Chapter 6 Configuring Zones and Zone Sets Creating Zone Sets Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Step 4 Drag and drop devices into the zone. Once the zone is populated with the devices, the name of the zone is displayed in italics. Click Add to zone or alias to move devices up or down by alias or by zone. (See Figure 6-5.) Figure 6-5 Adding Devices to a Zone Set Creating Zone Sets A zone set consists of one or more zones.
Chapter 6 Configuring Zones and Zone Sets Creating Zone Sets Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m To create zone sets, follow these steps: Step 1 Click Zone > Edit Local Full Zone Database from the Zone menu or right-click a VSAN folder in the Logical tab and choose Edit Local Full Zone Database from the pop-up menu. Step 2 Select a VSAN and click OK. You see the VSAN you selected in the Edit Local Full Zone Database window.
Chapter 6 Configuring Zones and Zone Sets What’s Next? Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure 6-7 Zone Set Activation/Deactivation Step 7 Click Close to close the dialog box. Step 8 After creating a zone set and activating it, make sure you save the configuration file. See Appendix D, “Configuration Files,” for details about copying and saving configuration files.
Chapter 6 Configuring Zones and Zone Sets What’s Next? Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m • Configure device aliases. Monitoring • If licensed, configure Fabric Manager Server to provide historical and performance trending. • Configure Call Home.
Chapter 6 Configuring Zones and Zone Sets What’s Next? Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m A P P E N D I X A Launching Fabric Manager in Cisco SAN-OS Releases Prior to 3.2(1) This appendix provides instructions for launching Fabric Manager Client in Cisco SAN-OS releases prior to 3.2(1). This Appendix contains the following sections: • Setting the Seed Switch in Cisco SAN-OS Releases 3.1(1) to 3.2(1), page A-1 • Setting the Seed Switch in Releases Prior to Cisco SAN-OS Release 3.
Appendix A Launching Fabric Manager in Cisco SAN-OS Releases Prior to 3.2(1) Setting the Seed Switch in Cisco SAN-OS Releases 3.1(1) to 3.2(1) Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure A-1 Step 2 Fabric Manager Server Login Dialog Box Set FM Server to the IP address where you installed Fabric Manager Server, or set it to localhost if you installed Fabric Manager Server on your local workstation.
Appendix A Launching Fabric Manager in Cisco SAN-OS Releases Prior to 3.2(1) Setting the Seed Switch in Releases Prior to Cisco SAN-OS Release 3.1(1) Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Note Step 9 The Accelerate Discovery check box should remain checked for normal operation. Uncheck this only if you have changed switch IP addresses. You may experience problems with SAN IDs in Fabric Manager if you uncheck this check box.
Appendix A Setting the Seed Switch in Releases Prior to Cisco SAN-OS Release 3.1(1) Launching Fabric Manager in Cisco SAN-OS Releases Prior to 3.2(1) Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m When you run Fabric Manager, you must select a switch for Fabric Manager to use to discover the fabric. For releases earlier than Cisco SAN-OS Release 3.
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m A P P E N D I X B Quick Config Wizard As of Cisco SAN-OS Release 3.1(1) and later, you can use the Quick Config Wizard on the Cisco MDS 9124 Switch to add or remove zone members per VSAN. You can use the Quick Config Wizard to perform interface-based zoning and to assign zone members for multiple VSANs using Device Manager.
Appendix B Quick Config Wizard Adding or Removing Zone Ports Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure B-1 Step 2 Discrepancies Dialog Box Click OK to continue or click Close to close the dialog box. You see the Quick Config Wizard dialog box shown in Figure B-2. Caution If there are discrepancies and you click OK, the affected VSANs in the zone databases are cleared. This may become disruptive if the switch is in use.
Appendix B Quick Config Wizard Adding or Removing Zone Ports Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure B-2 Step 3 Quick Config Wizard Click a check box in the Ports Zoned To column for the port you want to add or remove from a zone. The check box for the matching port is similarly set. The selected port pair is added or removed from the zone, creating a two-device zone.
Appendix B Quick Config Wizard Adding or Removing Zone Ports Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m Figure B-3 Confirm Changes Dialog Box Step 6 Optionally, right-click in the dialog box and click CLI Commands from the pop-up list to see the CLI commands for the zone members you added or removed. Step 7 Click Finish to save the configuration changes or click Cancel to close the dialog box without saving the changes.
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m A P P E N D I X C Configuring Static Domain IDs and Persistent FC IDs The domain manager on the principal switch in a VSAN assigns a domain ID to a switch that is joining the fabric. When a switch boots up or joins a new fabric, it can request a specific domain ID or take any available domain ID.
Appendix C Configuring Static Domain IDs and Persistent FC IDs Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m In the following procedure, the existing VSAN has a switch C-186 with a domain ID of 209. In Fabric Manager, the VSAN is statically configured and a persistent FC ID is enabled. This procedure does not alter the running domain ID.
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m A P P E N D I X D Configuration Files Configuration files can contain some or all of the commands needed to configure one or more switches. For example, you might want to download the same configuration file to several switches that have the same hardware configuration so that they have identical module and port configurations.
Appendix D Configuration Files Saving the Configuration File Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o . c o m To copy the configuration file, follow these steps: Step 1 In the Physical Attributes pane, expand Switches > Copy Configuration. Step 2 Check the check box for each switch configuration that you want to save. Set the From and To fields for each switch. Step 3 Click Apply.
Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Index Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Index Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Index Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Index Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .
Index Se n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a ck - d o c @ c i s c o .