Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8a) (OL-27554-05, May 16, 2013)

31
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8a)
OL-27554-05
Deprecated Features
Deprecated Features
Cisco MDS NX-OS Release 5.2 no longer supports the features listed in the following sections:
Zoning Features, page 31
SNIA Common Information Model, page 31
IVR Non-NAT Mode, page 31
Zoning Features
LUN zoning, read-only zones, and broadcast zones are no longer supported. These features affect the
following hardware:
Cisco MDS 9000 8-port 10-Gbps Fibre Channel over Ethernet (FCoE) module
Cisco MDS 9000 48-port 8-Gbps Advanced Fibre Channel Switching module
Cisco MDS 9000 32-port 8-Gbps Advanced Fibre Channel Switching module
You cannot bring up these modules if these features are already configured. You should completely
remove all configurations that include these features before you attempt to bring up these modules. In
addition, you cannot configure these features after you bring up these modules.
SNIA Common Information Model
SNIA Common Information Model (CIM or cimserver) commands are no longer supported. CIM is
supported in Cisco DCNM-SAN Release 5.2. The SMI-S agent that is installed on the Cisco
DCNM-SAN server allows external application to access fabric and switch profiles as specified in SNIA
CIM. For additional information, see the Cisco DCNM Release Notes, Release 5.2.
IVR Non-NAT Mode
IVR non-NAT mode is not supported in Cisco NX-OS Release 5.2(x). If you have IVR non-NAT mode
configured, see the “Upgrading Guidelines Specific to NX-OS Release 5.2(8a)” section on page 15 for
instructions on how to migrate to IVR NAT mode before upgrading to Cisco NX-OS Release 5.2(8).
Limitations and Restrictions
This section lists the limitations and restrictions. The following limitations are described:
SME Quorum, page 32
OUI Mismatch for SME Tape Targets, page 32
FCIP Performance Drop, page 33
FCoE Module, page 33
IPv6, page 33
User Roles, page 33
Schedule Job Configurations, page 33