Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8a) (OL-27554-05, May 16, 2013)

35
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 5.2(8a)
OL-27554-05
Limitations and Restrictions
Step 4 Use the feature ssh command to enable SSH.
CFS Cannot Distribute All Call Home Information
In MDS NX-OS Release 4.2(1b), CFS cannot distribute the following Call Home commands that can be
configured with the destination-profile command:
• destination-profile profile_name transport-method
• destination-profile profile_name http
The output of the show running-config callhome command shows configured Call Home commands:
switch# show running-config callhome
> version 4.1(3)
> callhome
> email-contact [e-mail] <mailto:[e-mail]>
> phone-contact [phone]
> streetaddress xyxxyx
> distribute
> destination-profile testProfile
> destination-profile testProfile format XML
> no destination-profile testProfile transport-method email
> destination-profile testProfile transport-method http
> destination-profile testProfile http https://xyz.abc.com
> destination-profile testProfile alert-group all
> transport email smtp-server 64.104.140.134 port 25 use-vrf management
> transport email from [e-mail] <mailto:[e-mail]>
> enable
> commit
When you attempt to apply these commands in the ASCII configuration, the following commands fail:
> no destination-profile testProfile transport-method email
> destination-profile testProfile transport-method http
> destination-profile testProfile http https://xyz.abc.com
To work around this issue,use these commands after the commit command.
Availability of F Port Trunking and F Port Channels
Trunking F ports and trunking F port channels are not supported on the following MDS 9000
components:
• DS-C9134-K9, Cisco MDS 9134 Multilayer Fabric Switch, if NPIV is enabled and the switch is
used as the NPV core switch
• DS-C9124-K9, Cisco MDS 9124 Multilayer Fabric Switch, if NPIV is enabled and the switch is
used as the NPV core switch
Trunking F ports, trunking F port channels and regular F port channels are not supported on the following
MDS 9000 components:
• DS-X9016, Cisco MDS 9000 2-Gbps16-Port Fibre Channel Switching Module
• DS-X9032, Cisco MDS 9000 2-Gbps 32-Port Fibre Channel Switching Module
• DS-X9032-14K9, Cisco MDS 9000 14/2-Port Multiprotocol Services Module (MPS-14/2)