Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2) (OL-14116-10 C0, November 2008)

Send documentation comments to [e-mail]
16
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.3(2)
OL-14116-10
Upgrading Your Cisco MDS SAN-OS Software Image
• FC-Redirect configuration for hosts or target connected locally
• FC-Redirect configuration created by application running on that switch.
If an upgrade is attempted when an active configurations is present, the switch will go into a disruptive
upgrade.
Note The software upgrade information in Table 7 applies only to Fibre Channel switching traffic. Upgrading
system software disrupts IP traffic and SSM intelligent services traffic.
Table 7 Nondisruptive Upgrade Path to SAN-OS Release 3.3(2)
Current Nondisruptive Upgrade Path
SAN-OS 3.3(1c) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.3(1a) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.2(3a) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.2(3) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.2(2c) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.2(1a) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.1(4) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.1(3a) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.1(2b) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.1(2a) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.1(2) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.1(1) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.0(3a) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.0(3) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.0(2a) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.0(2) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 3.0(1) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 2.1(3) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 2.1(2e) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 2.1(2d) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 2.1(2b) You can nondisruptively upgrade directly to SAN-OS Release 3.3(2).
SAN-OS 2.1(2) Upgrade to SAN-OS Release 2.1(2b) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(2d) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(2e) and then upgrade to Release 3.3(2).
or
Upgrade to SAN-OS Release 2.1(3) and then upgrade to Release 3.3(2).