Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-66
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
FCC-5
Error Message FCC-5-BAD_MSG: Received bad message: [chars].
Explanation The Fibre Channel Congestion Control process has received a malformed or
unrecognized message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCC-5-CONGESTION_STATE_CHANGE_NOTIF: Received Congestion State Change
notification to state: [dec].
Explanation The Fibre Channel Congestion Control process has received a congestion state change
notification.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4a).
Error Message FCC-5-DISABLE: FCC has been disabled.
Explanation
The Fibre Channel Congestion Control process has been disabled.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCC-5-ENABLE: FCC has been enabled.
Explanation The Fibre Channel Congestion Control process has been enabled.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCC-5-RATE_LIMIT_END_NOTIF: Received Rate Limit End notification.
Explanation
The Fibre Channel Congestion Control process has received a rate limit end
notification.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4a).
Error Message FCC-5-RATE_LIMIT_START_NOTIF: Received Rate Limit Start notification.
Explanation
The Fibre Channel Congestion Control process has received a rate limit start
notification.
Recommended Action No action is required.