Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-69
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
FCC_LC-6
Error Message FCC_LC-6-PRIO_UPDATE: Updated enable priority to [dec].
Explanation The Fibre Channel Congestion Control line card process is active for packets with
priority less than or equal to the threshold shown in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(4a).
FCD Messages
This section contains the FICON control device (FCD) messages.
FCD-7
Error Message FCD-7-SB3_ABTS_EXCHANGE: sb3 aborted exchange[hex] from vsan:[dec]
ch:[hex] chi:[hex] ccw:[hex] token:[hex] cmd:[hex] reason:[chars]
state:[chars]:[dec].
Explanation
SB3 aborted exchange due to the reason given. Aborts are caused by either the channel
or control unit detecting a device protocol error. Recovery actions are performed to restore
communication. In certain circumstances aborts occur in normal operations.
Recommended Action No action is required if communication with FICON control device is still
operational.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FCDD Messages
This section contains the Fibre Channel device discovery (FCDD) messages.
FCDD-SLOT#-3
Error Message FCDD-SLOT#-3-LOG_FCDD_ERR: Nonrecoverable error - exiting: [chars].
Explanation
Errors caused the program to exit.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).