Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-75
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message FCDOMAIN-2-INITIALIZATION_FAILED: Initialization sequence failed.
Explanation
The domain manager has not been able to complete the initialization sequence. The
domain manager depends on resources not available at the moment. The switch might be short in
memory or some other component might be unable to provide the necessary information to the
domain manager.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCDOMAIN-2-MTS_INITIALIZATION_FAILED: IPC initialization sequence
failed.
Explanation
The domain manager has not been able to complete the initialization sequence with the
interprocess communication (IPC) subsystem. The domain manager depends on resources not
available at the moment. The switch might be short in memory or some other component might be
unable to provide the necessary information to the domain manager.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCDOMAIN-2-MTSBIND_FAILED: Bind to IPC failed.
Explanation The domain manager has not been able to contact the inter-process communication
(IPC) module.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCDOMAIN-2-MTSREGISTRATION_FAILED: Registration of opcodes with IPC
Service failed.
Explanation
The domain manager has not been able to register its messages with the inter-process
communication (IPC) module.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCDOMAIN-2-MY_NON_VIRTUAL_DOM_CONFLICTS: During VSAN merge detected
that the local switch has the same domain ID [dec] and WWN [chars] of another
switch.
Explanation
The local switch has the same domain ID and WWN of another switch.
Recommended Action Check which switches have the same WWN and change one to a unique WWN.
Then change the domain ID for one of the switches.
Introduced Cisco MDS SAN-OS Release 3.0(1).