Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-102
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message FCS-3-NO_MTS_RESP: [chars].
Explanation
There was no response to a messaging and transaction service (MTS) request. The error
message indicates details of the messaging and transaction service (MTS) message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCS-3-NO_REMOTE_RESP: No response for request [chars] from domain
[dec] in VSAN [dec].
Explanation
There was no response to an FC2 request. The error message indicates Fabric
Configuration Server (FCS) request, remote domain, and VSAN ID.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCS-3-OTHER_ERR: [chars].
Explanation A Fabric Configuration Server (FCS) generic error occurred. The error message
indicates the description of the error.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCS-3-PSS_ERR: [chars].
Explanation
An error occurred during a Fabric Configuration Server (FCS) persistent storage
service (PSS) operation. The error message indicates the PSS operation that caused the error.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCS-3-SOCK_ERR: sd: [dec], [chars].
Explanation An FC-2 socket error occurred on socket-id (sd) listed in the error message. The error
message indicates the reason for failure.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).