Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-103
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
FCS-4
Error Message FCS-4-BAD_CT_FRAME: Invalid FCS frame: [chars] received from [hex].
Explanation An invalid FCS FC-CT frame with [chars] received from FC-ID [hex].
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.2(1).
FCS-5
Error Message FCS-5-API_FAIL: [chars]: [chars].
Explanation
An API called by Fabric Configuration Server (FCS) failed. The error message
indicates the failed API name and the reason for failure.
Recommended Action If this message is seen during a cold boot, it means that the queried module
came up after Fabric Configuration Server (FCS) and this case can be ignored.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FCS-6
Error Message FCS-6-INFORMATION: [chars].
Explanation
An event happened that affects FCS. The error message indicates the event.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FCS-6-REXMIT_PKT: Retransmitting request [chars] to domain [dec] in
VSAN [dec].
Explanation
There was a retransmission of an FC2 request. The error message indicates Fabric
Configuration Server (FCS) request, the remote domain, and the VSAN ID.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FCSP-MGR Messages
This section contains the Fibre Channel Security Protocol (FCSP-MGR) messages.