Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-107
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
FDMI-2
Error Message FDMI-2-MTS_ERROR: MTS message transmission failed with error [dec].
Explanation The Fabric-Device Management Interface (FDMI) process unsuccessfully tried to send
a messaging and transaction service (MTS) message. MTS error number is specified in the error
message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FDMI-2-PSS_CFG_RESTORE_ERROR: Configuration restoration for [chars]
failed with error [hex] for key type [dec].
Explanation
The Fabric-Device Management Interface (FDMI) read the saved configuration and
encountered an error while rebuilding the runtime configuration. The error message describes the
configuration that the process tried to restore and the system error code.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message FDMI-2-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for
[chars] failed with error [hex].
Explanation
The Fabric-Device Management Interface (FDMI) read the saved runtime database and
encountered an error while rebuilding the runtime database. The error message describes the runtime
database that the process tried to restore and the system error code.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
FDMI-3
Error Message FDMI-3-BAD_FRAME: Malformed frame received: [chars].
Explanation
The Fabric-Device Management Interface (FDMI) process received malformed frame.
The error message describes the problem.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FDMI-3-BAD_RESPONSE: response with command code: [hex].
Explanation The Fabric-Device Management Interface (FDMI) process received bad payload in
response.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).