Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-112
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message FICON-3-E_INVALID_PA_BRINGUP_FAIL: [chars].
Explanation
This port either has an invalid port address assigned or has no port address assigned.
Recommended Action Assign a valid FICON port number to the port.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message FICON-3-E_PORT_PROHIBIT_BRINGUP_FAIL: [chars].
Explanation This port has been prohibited. Prohibiting E or TE ports is not allowed. This port cannot
be configured in E mode or TE mode until the prohibit dynamic connectivity mask configuration is
changed.
Recommended Action Correct the prohibit dynamic connectivity mask (PDCM) for this port to bring
it up as an E or TE port in a FICON VSAN.
Introduced Cisco MDS SAN-OS Release 1.3(3).
Error Message FICON-3-PDCM_CHANGE_REJ_E_PORT: [chars].
Explanation
The FICON prohibit dynamic connectivity mask (PDCM) change rejected because an
E or TE port is being prohibited. Prohibiting an E or TE port in not allowed.
Recommended Action Correct the prohibit dynamic connectivity mask (PDCM) for this port to bring
the port up as an E or TE port in a FICON VSAN.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message FICON-3-E_UNASSIGN_NO_PN_FAIL: [chars].
Explanation Only port number already assigned can be removed.
Recommended Action Check port numbers in the configuration.
Introduced Cisco MDS SAN-OS Release 3.0(1).
FICON-5
Error Message FICON-5-STARTING: FICON manager process starting.
Explanation
FICON manager process is being started.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).