Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-115
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
FSPF-3
Error Message FSPF-3-BAD_FC2_PKT: Received bad FC2 packet on interface [chars] VSAN
[dec] : [chars].
Explanation
Fabric Shortest Path First (FSPF) received a bad FC2 packet on the interface and VSAN
shown in the error message. The error description is shown in the error message.
Recommended Action FSPF daemon has received a bad FC frame. Provide the output of the debug
fc2 pkt CLI command to your customer service representative.You can alternatively use Fabric
Manager and/or Device Manager instead of the command line method.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FSPF-3-CHECKSUM_FAIL: Checksum test failed for LSR domain [dec] in
VSAN [dec].
Explanation
Periodic database checksum test failed for LSR for the domain and VSAN shown in the
error message.
Recommended Action This indicates that the internal database is corrupted because of some memory
corruption problem. Provide the output of show fspf database to your customer service
representative. You may need to power cycle the switch.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FSPF-3-FC2_PROC_ERR: Error in processing [chars] packet on interface
[chars] VSAN [dec], Error = [chars].
Explanation
An error occurred in processing the FC2 packet on the interface and VSAN shown in
the error message. The internal error code is also shown in the error message.
Recommended Action Enter debug fspf error to get more information. Make sure there is no
misconfiguration of FSPF parameters on the two ends of the interface. Provide the output of the
show fspf vsan [vsan-id] and show fspf vsan[vsan-id] interface commands and the debug fspf fc
pkt command results for the specific interface to your customer service representative.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Error Message FSPF-3-FLOOD_ERR: Error in flooding the local LSR in VSAN [dec] ,
Error = [chars].
Explanation
Fabric Shortest Path First (FSPF) had an error in flooding the local LSR in VSAN shown
in the error message. The error description is shown in the error message.
Recommended Action Provide the output of the debug fspf flood and debug fspf error CLI
commands. If an error is reported in transmitting a packet, check if the interface is up and then enter
the debug fc2 error CLI command.
Introduced Cisco MDS SAN-OS Release 1.2(2a).