Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-125
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
ILC_HELPER Messages
This section contains the intelligent line card helper messages.
ILC_HELPER-2
Error Message ILC_HELPER-2-NO_LICENSE_REBOOT: Linecard [dec] will reboot now.
Explanation The SSE license has expired; therefore, the line card will be rebooted.
Recommended Action Install the appropriate SSE license so you can use the Storage Services Module
(SSM) features.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
ILC_HELPER-3
Error Message ILC_HELPER-3-INVALID_BOOTVAR: Invalid [chars] boot variable
configured. The linecard will come online in L2 mode.
Explanation
The boot variable is misconfigured to a wrong image. So the linecard comes online in
normal L2 mode instead of L3 mode.
Recommended Action Configure a proper image for the target boot variable.
Introduced Cisco MDS SAN-OS Release 3.0(3).
ILC_HELPER-6
Error Message ILC_HELPER-6-LICENSE_VALID: A valid license for linecard [dec] has
been obtained.
Explanation A valid license has been obtained for the Storage Services Module (SSM).
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
ILC-SPAN Messages
This section contains the intelligent line card SPAN (ILC-SPAN) messages.