Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-139
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IPS-3-ISLB_CFS_MERGE_CONFIG_FAILED: [chars]; [chars].
Explanation
An error occurred while distributing the CFS merge config data. The reason for the
failure is listed in the message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-3-ISLB_CFS_MERGE_FAILED: [chars]; [chars].
Explanation An error occurred while merging iSLB CFS fabrics. The reason for the failure is listed
in the message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-3-ISLB_CFS_MERGE_PRECOMMIT_FAILED: [chars]; [chars].
Explanation
An error occurred while pre-committing merge data. The reason for the failure is listed
in the message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-3-ISLB_CFS_MERGE_REQ_REJECTED: [chars].
Explanation Merge request rejected.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-3-ISLB_CFS_PWWN_RESV_CLAIM_FAILED: [chars].
Explanation
PWWN reservation claim failed. The reason for the failure is listed in the message.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).