Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-141
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IPS-3-ISLB_ZONE_ACTIVATION_FAILED: iSLB zoneset activation returned
[hex] for VSAN [dec].
Explanation iSLB zone set activation failed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-3-ISLB_ZONE_ACTIVATION_RETRY: iSLB zoneset activation returned
[hex] for VSAN [dec].
Explanation iSLB zone set activation failed because the zone server was busy.
Recommended Action Retry the iSLB zone set activation.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-3-ISLB_ZONE_NO_ACTIVE_ZONESET: iSLB zonset activation returned
[hex] for VSAN [dec].
Explanation iSLB zone set activation failed because there is no active zone set.
Recommended Action Activate a zone set in the specified VSAN and retry.
Introduced Cisco MDS SAN-OS Release 3.0(1).
IPS-4
Error Message IPS-4-FCIP_FTA_CFG_MISMATCH: [chars]: Mismatch in FCIP FICON Tape
Acceleration configuration with peer.
Explanation
The FCIP FICON Tape Acceleration configuration does not match the peer’s
configuration.
Recommended Action Adjust the FCIP FICON tape acceleration configuration to be consistent with
the peer.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IPS-4-FCIP_FTA_VSAN_UPDATE_WARNING: FCIP FICON tape acceleration VSAN
update had an error ([chars]) on interface [chars] causing a flap of the interface.
Explanation
The FCIP FICON tape acceleration VSAN configuration experienced an error when
disabling and enabling the VSAN over the FCIP tunnel. The FCIP tunnel was disabled and
re-enabled as a result of this error to ensure data integrity.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).