Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-155
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_CURRENT: svc-node[dec] image
is not compatible with current node image.
Explanation The new SAN Volume Controller (SVC) image is not compatible with the SVC image
currently running on the node.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(2a).
Error Message IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_SUP: svc-node[dec] image is
not compatible with system image.
Explanation The SAN Volume Controller (SVC) image on the node is not compatible with the
supervisor image.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(2a).
Error Message PS_SB_MGR-SLOT#-4-SB0_NOT_COMPAT_WITH_ADD_ON:Sibyte0 is not
compatible with add on.
Explanation The code of sibyte0 is not compatible with the add-on image running on the line card.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Deprecated Cisco MDS SAN-OS Release 1.3(2a).
Error Message IPS_SB_MGR-SLOT#-4-SB0_NOT_COMPAT_WITH_SB:Sibyte0 is not compatible
with current sibyte image.
Explanation
The new code of sibyte0 is not compatible with the running sibyte image.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Deprecated Cisco MDS SAN-OS Release 1.3(2a).
Error Message IPS_SB_MGR-SLOT#-4-SB0_NOT_COMPAT_WITH_SUP:Sibyte0 is not compatible
with supervisor.
Explanation
The code of sibyte0 is not compatible with the supervisor image.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.3(1).