Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-157
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IPS_SB_MGR-SLOT#-6-SBMGR_SDWRAP:Sbmgr sdwrap: [chars].
Explanation
This is for messages from the sibyte manager on the line card to the supervisor system
messages log.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Deprecated Cisco MDS SAN-OS Release 1.3(2a).
Error Message IPS_SB_MGR-SLOT#-6-SIBYTE_NOT_RESPONDING: Sibyte is not responding to
heartbeats.
Explanation The code of either core-0 or core-1 is not incrementing heartbeats periodically or
heartbeat responses from sibyte are not making through to the sibyte manager.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 1.2(2a).
Deprecated Cisco MDS SAN-OS Release 1.3(1).
IPsec Messages
This section contains the IPsec messages.
IPsec-2
Error Message IPSEC-2-IPSEC_INIT: IPSec initialization of [chars] [chars]
Explanation
IPsec initialization failed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message IPSEC-2-IPSEC_SPD_OVERFLOW_DUE_TO_ACL: SPD Overflow on interface due
to IP ACL [chars] bound to crypto map [chars] [dec].
Explanation
Modifying IP-ACL caused the security policy database on the interface to overflow.
The IP-ACL filter was not applied to the security policy database.
Recommended Action Remove the IP-ACL change.
Introduced Cisco MDS SAN-OS Release 2.0(1b).