Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to mdsfeedback-doc@cisco.com
2-158
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
IPsec-3
Error Message IPSEC-3-14_2_MODULE_PACKETS_DROPPED: [chars]: packets were dropped in
the module.
Explanation
The 14/2-port Multiprotocol Services (14/2-MPS) module dropped packets.
Recommended Action Enter the show ipsec internal crypto-acc interface gigabit <slot/port> CLI
command or use a similar Fabric Manager/Device Manager procedure to collect drop statistics. If
you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased
support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(2b).
Error Message IPSEC-3-IPSEC_FIPS_TEST_FAILED: IPSEC FIPS compliance test failed.
Explanation
IPsec FIPS compliance test failed.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.1(1).
Error Message IPSEC-3-IPSEC_MSG_SEND_FAILURE: failed to send [chars] to sap [dec]:
[chars].
Explanation Failed to send a message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
IPsec-5
Error Message IPSEC-5-IPSEC_CMS_IF_ACL_UPDATED: IP ACL [chars] updated while
Crypto map [chars] [dec] bound to interface(s).
Explanation
IP-ACL was updated while it is mapped to a crypto map that is bound to an interface(s).
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message IPSEC-5-IPSEC_DISABLED: IPSec Disabled.
Explanation IPsec is disabled.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).