Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-167
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message ISAPI-SLOT#-7-SSM_DEBUG: [chars].
Explanation
This is an intelligent switch API debug software message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
ISNS Messages
This section contains the Internet Storage Name Service (ISNS) messages.
ISNS-2
Error Message ISNS-2-ISNS_CFS_OPERATION_FAILED: iSNS CFS [chars] failed.
Explanation
iSNS CFS operation failed.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message ISNS-2-ISNS_INIT: iSNS initialization of [chars] [chars].
Explanation
Internet Storage Name Service (ISNS) initialization failed. ISNS is automatically
restarted.
Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller
directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
IVR Messages
This section contains the inter-VSAN routing (IVR) messages.
IVR-2
Error Message IVR-2-CFS_PEER_LOST_WITHIN_SESSION: CFS peer with switch wwn [chars]
was lost in the middle of an active CFS session. Abort the CFS session and re-enter
the configuration changes.
Explanation
Due to port flaps (enable and disable of the VSAN), link outages, switch restarts and
so on, a CFS peer switch of IVR was lost. The current configuration changes would not be applied
to this peer until the peer merges with this switch. The CFS merge may fail if the configuration at
the lost peer conflicts with the changes made in this session. Also, IVR auto topology could be out