Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-175
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IVR-3-DOMAIN_DISALLOWED_IN_INTEROP: Device with port WWN [chars] and
FCID [chars] may not be able to participate in Inter-VSAN zone since domain [dec]
is disallowed in the interop mode for VSAN [dec].
Explanation
VSAN interop modes place restrictions on what domain ranges are allowed. This
domain is out of the range allowed for this interop mode. Refer to the Cisco MDS 9000 Family CLI
Configuration Guide or Cisco MDS 9000 Family Fabric Manager Configuration Guide for details
on the domain range limitations.
Recommended Action Change the domain of the switch to which this IVR zone member is connected
so that it is within the allowed domain list for the interop mode. The domain identifier can be
statically assigned using fcdomain interface. You can also configure a range of domains allowed in
a VSAN using the fcdomain allowed-domains’ interface.'
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IVR-3-DOMAIN_UNAVAILABLE: Device with port WWN [chars] and FCID
[chars] may not be able to participate in Inter-VSAN zone since domain [dec] is
already assigned in VSAN [dec].
Explanation
Device with the named port WWN and FC ID may not be able to participate in
Inter-VSAN zone because the named domain is already assigned in the named VSAN.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IVR-3-FC2_ERROR: FC2 API [chars] failed with error [hex] for [chars].
Explanation IVR invoked a Fibre Channel Layer 2 (FC-2) API for a socket and received an error
code. The error message describes the API and the error.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message IVR-3-INTERNAL_ERROR: Internal error: [chars].
Explanation
The IVR process encountered a general error, one that does not fall in any of the
categories. The error message describes the error and its context.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message IVR-3-FCID_REWRITE_REQUEST_TO_ACL_FAILED: fcid rewrite [chars]
request vsan [dec] did [chars] sid [chars] failed:[chars].
Explanation
This happens either after IVR retried the request few times or ACL experienced error
while processing the request.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).