Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)

Send documentation comments to [e-mail]
2-178
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message IVR-3-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for
[chars] failed with error [hex].
Explanation IVR read the saved runtime database and encountered an error while rebuilding the
runtime database. The error message describes the runtime database that the process tried to restore
and shows the system error code.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message IVR-3-RIB_ERROR: RIB API, [chars], failed with error [hex].
Explanation
IVR invoked the Routing Information Base (RIB) API and received an error code. The
error message describes the API and the error.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).
Error Message IVR-3-ROUTE_REQUEST_TO_ACL_FAILED: route [chars] request vsan [dec]
domain [dec] failed:[chars].
Explanation
This happens when either after IVR retried the request few times or ACL experienced
error while processing the request.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 3.0(1).
Error Message IVR-3-TOPOLOGY_COMPUTATION_FAILED: Inter-VSAN Topology computation
has failed due to: [chars].
Explanation
Inter-VSAN topology has failed because of the reason shown in the message. Possible
reasons are (a) number of AFID/VSAN combination is more than the maximum supported value of
128, or (b) number of IVR-enabled switches is more than the maximum supported value of 128.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.1(1a).
Error Message IVR-3-UNEXPECTED_MTS_MSG: Unexpected MTS message, opcode [dec], is
received.
Explanation
IVR process received an unexpected message and transaction service (MTS) event. The
MTS opcode is specified in the error message.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 1.3(1).